服务器在线 - 服务器软件 - 网站地图 服务器在线,专注于服务器技术!

当前位置:主页 > FTP服务器 > VsFTP > 正文

vsftp的安装与配置

时间:2015-01-18    来源:服务器在线    投稿:泡泡    点击:

安装配置过程:

1.下载软件包

先取得wget,方便其他软件包的下载

# ftp www.sunfreeware.com

ftp >; cd pub/freeware/sparc/9

ftp >; get wget-1.9.1-sol9-sparc-local.gz

ftp >; bye

安装wget

# gunzip wget-1.9.1-sol9-sparc-local.gz

# pkgadd -d wget-1.9.1-sol9-sparc-local

下载vsftpd

# wget ftp://vsftpd.beasts.org/users/cevans/vsftpd-2.0.1.tar.gz

# gunzip vsftpd-2.0.1.tar.gz

# tar xvf vsftpd-2.0.1.tar

下载编译vsftpd必需的软件包

# wget ftp://ftp.sunfreeware.com/pub/freeware/sparc/9/make-3.80-sol9-sparc-local.gz

# gunzip make-3.80-sol9-sparc-local.gz

# pkgadd -d make-3.80-sol9-sparc-local

# wget

ftp://mirror.sprintlink.net/sunfreeware.com/pub/freeware/sparc/9/libiconv-1.8-sol9-sparc-local.gz

# gunzip libiconv-1.8-sol9-sparc-local.gz

# pkgadd -d libiconv-1.8-sol9-sparc-local

# wget ftp://mirror.sprintlink.net/sunfreeware.com/pub/freeware/sparc/9/gcc_small-3.3.2-sol9-sparc-local.gz

# gunzip gcc_small-3.3.2-sol9-sparc-local.gz

# pkgadd -d gcc_small-3.3.2-sol9-sparc-local

2.编译 安装vsftpd

# cd vsftpd-2.0.1

# make

# mkdir /usr/share/empty

# cp vsftpd /usr/local/bin/vsftpd

# cp vsftpd.conf.5 /usr/local/man/man5

# cp vsftpd.8 /usr/local/man/man8

# cp vsftpd.conf /etc

3.配置vsftpd

建ftp目录和ftp帐号,所有ftp登录用户都映射到此帐号

# mkdir /data/ftp

# groupadd ftp

# useradd -d /data/ftp -g ftp -s /bin/false ftp

# chown ftp:ftp /data/ftp

# echo "ftp" >;>; /etc/vsftpd.chroot_list

建立放置每个ftp用户的独自的配置文件的目录

# mkdir /etc/vsftpd

修改/etc/vsftpd.conf

# vi /etc/vsftpd.conf

anonymous_enable=NO

local_enable=YES

write_enable=NO

local_umask=022

anon_umask=022

anon_upload_enable=NO

anon_mkdir_write_enable=NO

dirmessage_enable=YES

xferlog_enable=YES

connect_from_port_20=YES

xferlog_file=/var/log/vsftpd.log

idle_session_timeout=600

data_connection_timeout=120

ftpd_banner=Welcome!

chroot_list_enable=YES

chroot_list_file=/etc/vsftpd.chroot_list

user_config_dir=/etc/vsftpd

ls_recurse_enable=NO

hide_ids=YES

userlist_enable=YES

userlist_deny=NO

userlist_file=/etc/vsftpd.user_list

guest_enable=YES

guest_username=ftp

max_clients=50

max_per_ip=2

pasv_min_port=55000

pasv_max_port=55100

listen=YES

local_root=/data/ftp/$USER # 每个用户都有自己的ftp主目录

user_sub_token=$USER

建启动脚本

# vi /etc/rc3.d/S83vsftpd

[Copy to clipboard] [ - ]

CODE:

#!/sbin/sh

case "$1" in

start)

        /usr/local/bin/vsftpd &

;;

stop)

        pkill vsftpd

;;

*)

        echo "Usage: $0 { start | stop }"

        exit 1

;;

esac

exit 0

4.用户管理

手工添加用户

# useradd -d /dev/null -g ftp -s /bin/false test

设置密码

# passwd test

在/etc/vsftpd/下添加一个与用户名相同名字的文件

# vi /etc/vsftpd/test

若只允许下载,则添加如下内容

anon_world_readable_only=no

anon_max_rate=512000

若允许上传,则添加如下内容

anon_world_readable_only=NO  

write_enable=YES  

anon_upload_enable=YES

anon_mkdir_write_enable=YES

anon_other_write_enable=YES

anon_max_rate=1024000

追加新增的用户test到/etc/vsftpd.user_list文件

# echo "test">;>; /etc/vsftpd.user_list

建立test用户的ftp主目录

# mkdir /data/ftp/test

# chown ftp:ftp /data/ftp/test

5.用户管理脚本

方便添加、删除用户、修改用户密码

安装脚本运行需要的软件包:

# wget  ftp://mirror.sprintlink.net/sunfreeware.com/pub/freeware/sparc/9/tcl-8.4.6-sol9-sparc-local.gz

# gunzip tcl-8.4.6-sol9-sparc-local.gz

# pkgadd -d tcl-8.4.6-sol9-sparc-local

# wget

ftp://mirror.sprintlink.net/sunfreeware.com/pub/freeware/sparc/9/tk-8.4.6-sol9-sparc-local.gz

# gunzip tk-8.4.6-sol9-sparc-local.gz

# pkgadd -d tk-8.4.6-sol9-sparc-local

# wget

ftp://mirror.sprintlink.net/sunfreeware.com/pub/freeware/sparc/9/expect-5.40-sol9-sparc-local.gz

# gunzip expect-5.40-sol9-sparc-local.gz

# pkgadd -d expect-5.40-sol9-sparc-local

setpasswd.exp

[Copy to clipboard] [ - ]

CODE:

#! /usr/local/bin/expect -f

#username is passed as 1st arg,password as 2nd

set password [lindex $argv 1]

spawn passwd [lindex $argv 0]

expect "*Password:"

send "$password\r"

expect "*Password:"

send "$password\r"

expect eof

ftpuseradd

[Copy to clipboard] [ - ]

CODE:

#!/sbin/sh

# ftpuseradd

usage()

{

echo "Usage: `basename $0` [-w] [-m maxrate] username password"

exit 1

}

WRITABLE="no" # can't upload

MAXRATE="64000" # default max rate is 64Kb

OPT="no"

while getopts :wm: OPTION

do

  case $OPTION in

  w) WRITABLE="yes"

    OPT="yes"

    ;;

  m) MAXRATE=$OPTARG

    OPT="yes"

    ;;

  \?) usage

    ;;

  esac

done

shift `expr $OPTIND - 1`

if [ $# -ne 2 ]

then

  usage

fi

USERNAME=$1

PASSWORD=$2

useradd -d /dev/null -g ftp -s /bin/false $USERNAME

if [ $? -eq 0 ]

then

  setpasswd.exp $USERNAME $PASSWORD >; /dev/null

  echo "anon_world_readable_only=NO" >; /etc/vsftpd/$USERNAME

  echo "anon_max_rate=$MAXRATE" >;>; /etc/vsftpd/$USERNAME

  if [ "$WRITABLE" = "yes" ]

  then

    echo "write_enable=YES" >;>; /etc/vsftpd/$USERNAME

    echo "anon_upload_enable=YES" >;>; /etc/vsftpd/$USERNAME

    echo "anon_mkdir_write_enable=YES" >;>; /etc/vsftpd/$USERNAME

    echo "anon_other_write_enable=YES" >;>; /etc/vsftpd/$USERNAME

  fi

  echo "$USERNAME" >;>; /etc/vsftpd.user_list

  mkdir /data/ftp/$USERNAME

  chown ftp:ftp /data/ftp/$USERNAME

fi

ftpuserdel

[Copy to clipboard] [ - ]

CODE:

#!/sbin/sh

# ftpuserdel

usage()

{

echo "Usage: `basename $0` [-r] username"

exit 1

}

REMOVEDIR="no"

while getopts :r OPTION

do

  case $OPTION in

  r) REMOVEDIR="yes"

    ;;

  \?) usage

    ;;

  esac

done

shift `expr $OPTIND - 1`

if [ $# -ne 1 ]

then

  usage

fi

USERNAME=$1

userdel $USERNAME

if [ $? -eq 0 ]

then

  if [ -f /etc/vsftpd.user_list ]

  then

    cat /etc/vsftpd.user_list | sed "/^$USERNAME$/d" | sed '1,$ w /etc/vsftpd.user_list' >; /dev/null

  fi

  if [ -f /etc/vsftpd/$USERNAME ]

  then

    rm -f /etc/vsftpd/$USERNAME >; /dev/null

  fi

  if [ -d /data/ftp/$USERNAME -a "$REMOVEDIR" = "yes" ]

  then

    rm -rf /data/ftp/$USERNAME >; /dev/null

  fi

fi

ftppasswd

[Copy to clipboard] [ - ]

CODE:

#!/sbin/sh

# ftppasswd

usage()

{

echo "Usage: `basename $0` username password"

exit 1

}

if [ $# -ne 2 ]

then

  usage

fi

USERNAME=$1

PASSWORD=$2

setpasswd.exp $USERNAME $PASSWORD

6.参考:

Manpage of VSFTPD.CONF, http://vsftpd.beasts.org/vsftpd_conf.html

Freeware for Solaris, http://www.sunfreeware.com/

在SOLARIS上编译安装VSFTPD, http://bbs.chinaunix.net/forum/viewtopic.php?t=344943

1.下载最新的稳定版vsftpd-1.2.1.tar.gz

  2.卸载原有的rpm的vsftpd
  rpm -e vsftpd
  3.tar xvzf vsftpd-1.2.1.tar.gz
  4.cd vsftpd-1.2.1
  5.make
  6.useradd nobody
  7.mkdir /usr/share/empty
  8.mkdir /var/ftp
  9.useradd -d /var/ftp ftp
  10.chown root.root /var/ftp
  11.chmod og-w /var/ftp
  说明:如果你象我一样原来有rpm的vsftp,只是卸载了,可以省略6-11步,如果原来没有安装vsftp,请按部就班。
  12.make install
  13.vi /etc/xinetd.d/vsftpd
  把disable=yes改成no,保存退出。然后service xinetd restart,OK!新装的vsftp已经可以工作了!
  说明:默认安装的vsftpd是以xinetd的方式启动的。你需要上述操作,一会儿,我们再来讲把它改成独立启动的服务。
  14.ftp 127.0.0.1
   输入用户名ftp,密码直接回车,OK!已经可以连接了!输入quit退出。然后重新ftp 127.0.0.1,输入本地用户和密码,却提示login faild!why?原来少一个本地用户认证的pam文件。
  15.cp RedHat/vsftpd.pam /etc/pam.d/ftp(注意,没有这一步将不能使用本地用户登录!)
  16.cp vsftpd.conf /etc/vsftpd.conf(现在,默认还是只能匿名用户登录)
  17.vi /etc/vsftpd.conf
  把anonmous_enable=YES改成NO(禁掉匿名链接,不安全)
  把local_enable=YES前的注释去掉(打开本地用户连接的权限)
  把write_enable=YES前的注释去掉(打开本地用户的写权限)
  把local_umask=022前的注释去掉
  service xinetd restart
  18.再次测试
  ftp 127.0.0.1
  使用ftp用户空密码登录,将出现login faild
  使用本地用户登录,OK!已经成功了!上传文件,也OK![/list:u:93f3c4a2db]
  这样是不是就完事儿了?不是,做一个FTP,我们通常还需要一些特殊要求:比如一个用户我只允许他下载,不允许他上传;另一个用户可以下载也可以上传,但是他不能删除文件,不能给文件改名;另外,我还需要我的FTP使用非常规的端口,限制下载的速度,还需要一个***用户。那怎么办?请看下面的部分!

解压

tar -zxf vsftpd-xx.tar.gz

cd ./vsftpd-xx

#vsftpd需要使用nobody来作为运行者,一般已经存在

useradd nobody

#安装时需要/usr/share/empty/

作为临时目录,一般已经存在

mkdir /usr/share/empty/

#编译

make

make install

#如果make install没有安装文件,你可能需要手动执行下面的命令

#cp vsftpd /usr/local/sbin/vsftpd

#cp vsftpd.conf.5 /usr/local/man/man5

#cp vsftpd.8 /usr/local/man/man8

cd ./EXAMPLE/INTERNET_SITE

cp vsftpd.conf /etc

cp vsftpd.xinetd /etc/xinetd.d/vsftpd

/etc/rc.d/init.d/xinetd restart

VSFTPD我是自己编译的,在论坛上许多文章说是编译使用的是XINETD模式,所以只要在/etc/xinet

d.d/vsftpd文件中,把disable=no改成YES就行了!

还有就是在/etc/vsftpd.conf文件添加listen=yes这样就改成了STANDALONE独立模式!

500 OOPS: could not bind listening IPv4 socket  错误:

因为xinetd已经启动了vsftpd,而vsftpd设置成了stardalone模式,所以,先

停止xinetd服务,  service xinetd stop ,然后 /usr/local/sbin/vsftpd &

启动ftp服务

利用tar包安装和配置高可用性的vsftp

作者:梁尚锋 网名:好好先生

昨天看到有朋友说用tar包安装的vsftp不能用本地用户登录,感觉十分诧异。但自己也仅做过rpm

的,所以没有发言权。今天在自己机器上用tar包成功安装并配置了一个vsftp,现在把我的过程和

大家说一下,希望对大家有所帮助!

一、安装

[list:1af834efb8]1.下载最新的稳定版vsftpd-1.2.1.tar.gz

  2.卸载原有的rpm的vsftpd

  rpm -e vsftpd

  3.tar xvzf vsftpd-1.2.1.tar.gz

  4.cd vsftpd-1.2.1

  5.make

  6.useradd nobody

  7.mkdir /usr/share/empty

  8.mkdir /var/ftp

  9.useradd -d /var/ftp ftp

  10.chown root.root /var/ftp

  11.chmod og-w /var/ftp

说明:如果你象我一样原来有rpm的vsftp,只是卸载了,可以省略6-11步,如果原来没有安装vsft

p,请按部就班。

12.make install

  13.vi /etc/xinetd.d/vsftpd

  把disable=yes改成no,保存退出。然后service xinetd restart,OK!新装的vsftp已经可以工

作了!

  说明:默认安装的vsftpd是以xinetd的方式启动的。你需要上述操作,一会儿,我们再来讲把它

改成独立启动的服务。

14.ftp 127.0.0.1

  输入用户名ftp,密码直接回车,OK!已经可以连接了!输入quit退出。然后重新ftp 127.0.0.1

,输入本地用户和密码,却提示login faild!why?原来少一个本地用户认证的pam文件。

15.cp RedHat/vsftpd.pam /etc/pam.d/ftp(注意,没有这一步将不能使用本地用户登录!)

16.cp vsftpd.conf /etc/vsftpd.conf(现在,默认还是只能匿名用户登录)

17.vi /etc/vsftpd.conf

  把anonmous_enable=YES改成NO(禁掉匿名链接,不安全)

  把local_enable=YES前的注释去掉(打开本地用户连接的权限)

  把write_enable=YES前的注释去掉(打开本地用户的写权限)

  把local_umask=022前的注释去掉

  service xinetd restart

18.再次测试

  ftp 127.0.0.1

  使用ftp用户空密码登录,将出现login faild

  使用本地用户登录,OK!已经成功了!上传文件,也OK![/list:u:1af834efb8]

  这样是不是就完事儿了?不是,做一个FTP,我们通常还需要一些特殊要求:比如一个用户我

只允许他下载,不允许他上传;另一个用户可以下载也可以上传,但是他不能删除文件,不能给文

件改名;另外,我还需要我的FTP使用非常规的端口,限制下载的速度,还需要一个***用户。

那怎么办?请看下面的部分!

二、高级配置

[list:1af834efb8]   1.使用独立服务

  a.vi /etc/xinetd.d/vsftpd把disable=no还改成yes,不再需要它了!

  b.vi /etc/vsftpd.conf在结尾加上listen=YES

    c.service xinetd restart

    d./usr/local/sbin/vsftpd /etc/vsftpd.conf &

    OK!现在vsftp已经是独立启动的服务了!

  2.使用非常规的端口(2121)

  a.vi /etc/vsftpd.conf

    添加listen_port=2121,保存退出

  b.killall -9 vsftpd

    c./usr/local/sbin/vsftpd /etc/vsftpd.conf &

  OK!现在用ftp 127.0.0.1将提示你连接被拒绝了(ftp:connect:Connetion refuesd)!然后ftp

127.0.0.1 2121输入用户名和密码,OK!可以登录!

  3.实现不同用户不同权限

  现在我们就来实现三个用户的不同权限:a.upload用户,可以上传下载,可以新建文件夹,但不

能删除文件和文件夹,不能重命名原有文件和文件夹;b.download用户,只能下载;c.admin用户

,***,可以上传,可以下载,可以新建文件夹,可以删除和更改文件和文件夹名。这些用户都

不能登录系统,并且用ftp连接时锁定在自己的家目录中不能进入系统文件夹。

  a.cat << ! >logins.txt

    >upload

    >******* #upload用户的密码

    >download

    >*******

    >admin

    >****************

    >!

    说明,此文本文件的格式是:单数行为用户名,偶数行为密码

  b.db_load -T -t hash -f logins.txt /etc/vsftpd_login.db

  c.chmod 600 /etc/vsftpd_login.db

  d.cd vsftpd-1.2.1/EXAMPLE;cp VIRYUAL_USERS/vsftpd.pam /etc/pam.d/ftp.vu (进入你的解

包的源码目录,把虚拟用户的认证文件拷贝到/etc/pam.d/下)

  e.useradd -d /home/ftpsite virtual;chmod 700 /home/ftpsite;su - virtual -c "echo

hello>/homt/ftpsite/test.file(建立虚拟用户所要访问的ftp目录并设置仅 virtual用户访问的

权限和创建一个供下载实验的文件)

  f.vi /etc/vsftpd.conf在此文件中插入下面的配置语句

  guest_enable=YES(启用虚拟用户)

  guest_username=virtual(将虚拟用户映射为本地virtual用户)

  pam_service_name=ftp.vu(指定PAM配置文件为ftp.vu)

  user_config_dir=/etc/vsftpd_user_conf(指定不同虚拟用户配置文件的存放路径)

  保存退出

  g.mkdir /etc/vsftpd_user_conf

  h.开放不同用户的不同权限 echo "anon_world_readable_only=NO">

/etc/vsftpd_user_conf/download(开放download用户的下载权限——只能下载;注意这个不地方

不要写成YES,否则将不能列出文件和目录)

  cp /etc/vsftpd_user_conf/download /etc/vsftpd_user_conf/upload

  vi /etc/vsftpd_user_conf/upload,添加下列行

  write_enable=YES (增加写权限)

  anon_upload_enable=YES(增加上传权限)

  anon_mkdir_write_enable=YES (增加创建目录的权限)

  cp /etc/vsftpd_user_conf/upload /etc/vsftpd_user_conf/admin

  增加一行:

  anno_other_writer_enable=YES(增加***用户的删除/重命名的权限)

  i.测试

    killall -9 vsftpd;/usr/local/sbin/vsftpd /etc/vsftpd.conf &

    ftp 127.0.0.1 2121

    以用户名download和你设置的密码登录,ls,可以看到文件,下载,成功!put一个文件,提

Permission denied。rename test.file同样权限被拒绝;delete test.file同样不成功!

    输入quit退出,以upload用户登录,OK!可以上传,下载,mkdir lsf,提示“/lsf" created

;rename lsf lsf1提示Permission denied,删除文件同样不成功!

  输入quit退出,以admin用户登录,可以有上述所有权限,然后rmdir lsf,提示Remove

directory o [eration successful;delete test.file提示Delete operation successful!OK,大

功告成了!

  4.还有限速,限制同一个IP的连接数,限制最大连接数等,我在另外的文章中已经写过,在此不

再赘述![/list:u:1af834efb8]

三、附目

  1.我的/etc/vsftpd.conf文件的内容

  [quote:1af834efb8]# Example config file /etc/vsftpd.conf

#

# The default compiled in settings are fairly paranoid. This sample file

# loosens things up a bit, to make the ftp daemon more usable.

# Please see vsftpd.conf.5 for all compiled in defaults.

#

# READ THIS: This example file is NOT an exhaustive list of vsftpd options.

# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's

# capabilities.

#

# Allow anonymous FTP? (Beware - allowed by default if you comment this out).

anonymous_enable=NO

#

# Uncomment this to allow local users to log in.

local_enable=YES

#

# Uncomment this to enable any form of FTP write command.

write_enable=YES

#

# Default umask for local users is 077. You may wish to change this to 022,

# if your users expect that (022 is used by most other ftpd's)

local_umask=022

#

# Uncomment this to allow the anonymous FTP user to upload files. This only

# has an effect if the above global write enable is activated. Also, you will

# obviously need to create a directory writable by the FTP user.

anon_upload_enable=NO

#

# Uncomment this if you want the anonymous FTP user to be able to create

# new directories.

anon_mkdir_write_enable=NO

#

# Activate directory messages - messages given to remote users when they

# go into a certain directory.

dirmessage_enable=YES

#

# Activate logging of uploads/downloads.

xferlog_enable=YES

#

# Make sure PORT transfer connections originate from port 20 (ftp-data).

connect_from_port_20=YES

#

# If you want, you can arrange for uploaded anonymous files to be owned by

# a different user. Note! Using "root" for uploaded files is not

# recommended!

#chown_uploads=YES

#chown_username=whoever

#

# You may override where the log file goes if you like. The default is shown

# below.

#xferlog_file=/var/log/vsftpd.log

#

# If you want, you can have your log file in standard ftpd xferlog format

#xferlog_std_format=YES

#

# You may change the default value for timing out an idle session.

#idle_session_timeout=600

#

# You may change the default value for timing out a data connection.

#data_connection_timeout=120

#

# It is recommended that you define on your system a unique user which the

# ftp server can use as a totally isolated and unprivileged user.

#nopriv_user=ftpsecure

#

# Enable this and the server will recognise asynchronous ABOR requests. Not

# recommended for security (the code is non-trivial). Not enabling it,

# however, may confuse older FTP clients.

#async_abor_enable=YES

#

# By default the server will pretend to allow ASCII mode but in fact ignore

# the request. Turn on the below options to have the server actually do ASCII

# mangling on files when in ASCII mode.

# Beware that turning on ascii_download_enable enables malicious remote parties

# to consume your I/O resources, by issuing the command "SIZE /big/file" in

# ASCII mode.

# These ASCII options are split into upload and download because you may wish

# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),

# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be

# on the client anyway..

ascii_upload_enable=YES

ascii_download_enable=YES

#

# You may fully customise the login banner string:

ftpd_banner=Welcome to Serv-U FTP serser. #(一个真实的慌言:em02:)

#

# You may specify a file of disallowed anonymous e-mail addresses. Apparently

# useful for combatting certain DoS attacks.

#deny_email_enable=YES

# (default follows)

#banned_email_file=/etc/vsftpd.banned_emails

#

# You may specify an explicit list of local users to chroot() to their home

# directory. If chroot_local_user is YES, then this list becomes a list of

# users to NOT chroot().

chroot_list_enable=YES

# (default follows)

chroot_list_file=/etc/vsftpd.chroot_list

#

# You may activate the "-R" option to the builtin ls. This is disabled by

# default to avoid remote users being able to cause excessive I/O on large

# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

# the presence of the "-R" option, so there is a strong case for enabling it.

#ls_recurse_enable=YES

chroot_local_user=YES

listen_port=2121

listen=yes

guest_enable=YES

guest_username=virtual

pasv_min_port=30000

pasv_max_port=30999

pam_service_name=ftp.vu

anon_world_readable_only=NO

user_config_dir=/etc/vsftpd_user_conf   [/quote:1af834efb8]

  2.我的/etc/vsftpd_user_conf/download的内容

[quote:1af834efb8]anon_world_readable_only=NO[/quote:1af834efb8]  

3.我的/etc/vsftpd_user_conf/upload的内容

[quote:1af834efb8]anon_world_readable_only=NO

write_enable=YES

anon_upload_enable=YES

anon_mkdir_write_enable=YES[/quote:1af834efb8]

  4.我的/etc/vsftpd_user_conf/admin的内容

[quote:1af834efb8]anon_world_readable_only=NO

write_enable=YES

anon_upload_enable=YES

anon_other_write_enable=YES

anon_mkdir_write_enable=YES[/quote:1af834efb8]

  5.自启动脚本,在/etc/rc.local中加入/usr/local/sbin/vsftpd /etc/vsftpd.conf &

如果您的问题仍未解决,还可以加入服务器在线技术交流QQ群:8017413寻求帮助。


上一篇:vsftpd配置文件详解
下一篇:没有了
相关内容
最新热点内容